AEMC AC Current Probe Model MN213

Alat Laboratorium Mikrobiologi

Deskripsi produk
AC Current Probe Model MN213
The MN213 is a general purpose AC current probe designed for DMMs and other measuring instruments with current input. It has a 1000:1 ratio and an output of 1mA per Amp in the primary (inside the jaw). The MN213 has integral 5 ft (1.5m) leads terminated by shrouded banana plugs. The MN213 has protective diodes across the output that limit the voltage in open secondary situations.

Specifications :
Maximum Conductor Size
0.78" (20mm), bus bar 20x5mm
Current Range
200Arms AC
Measurement Range
0.5 to 240A
Output
5ft (1.5m) lead with 4mm safety banana plug
Transformation Ratio
1000:1
Output Signal
1mA/A AC (200mA @ 200A)
Accuracy 50/60Hz
1% ± 0.5A @ 200A
Frequency Range
40Hz to 10KHz
Phase Shift at 50Hz
2.5° @ 200A
Open Secondary Voltage
Limited to <6V with diodes
Load Impedance
1Ω, 10Ω max with derating
Overload
240A for 10 min ON, 30 min OFF
Dimensions (H x W x D)
5.47 x 2.00 x 1.18” (139 x 51 x 30mm)
Weight With 24” (610mm) Sensor
6.3 oz (180g)
Operating Temperature
14° to +131°F (-10° to +55°C)
Storage Temperature
-40° to +158°F (-40° to +70°C)
Operating Humidity
90% RH
Pollution Degree
2
Ingress Protection (Ip)
IP40
EMC
EN 61326-1
Safety Compliance
EN/IEC 61010-1 600V CAT III,
EN/IEC 61010-032

Hubungi :

Juni Tarigan (Mr.)

0811 198 0702


Pera (Ms.)

0811 3801 0819


Admin

0813-2310-201


PT. ANDALAN BANGUN SEJAHTERA

Jl. Sumur Batu No. 1, Kemayoran

Jakarta Pusat - Indonesia 10640

Telp : +6221-42803207, 4227517


Fax : +6221-42803208