AEMC AC Current Probe Model MN253

Alat Laboratorium Mikrobiologi

Deskripsi produk
AC Current Probe Model MN253
The MN253 is a general purpose AC current probe with voltage output. It is designed for use with DMMs or with measuring instruments with voltage inputs. These probes permit the measurement or recording of current with instruments without current ranges. The voltage output is proportional to the current measured (through the jaws). The MN253 offers a voltage output of 10mV per amp measured. The MN253 has integral 5 ft (1.5m) leads terminated by shrouded banana plugs.
Specifications :
Maximum Conductor Size
0.78" (20mm), bus bar 20x5mm
Current Range
200Arms AC
Measurement Range
0.1 to 240A
Output
5ft (1.5m) lead with 4mm safety banana plug
Transformation Ratio
N/A
Output Signal
10mV/A AC (2000mV @ 200A)
Accuracy 50/60Hz
1% ± 0.5A @ 200A
Frequency Range
40Hz to 10KHz
Phase Shift at 50Hz
2.5° @ 200A
Open Secondary Voltage
N/A
Load Impedance
1MΩ
Overload
240A for 10 min ON, 30 min OFF
Dimensions (H x W x D)
5.47 x 2.00 x 1.18” (139 x 51 x 30mm)
Weight With 24” (610mm) Sensor
6.3 oz (180g)
Operating Temperature
14° to +131°F (-10° to +55°C)
Storage Temperature
-40° to +158°F (-40° to +70°C)
Operating Humidity
90% RH
Pollution Degree
2
Ingress Protection (Ip)
IP40
EMC
EN 61326-1
Safety Compliance
EN/IEC 61010-1 600V CAT III,
EN/IEC 61010-032

Hubungi :

Juni Tarigan (Mr.)

0811 198 0702


Pera (Ms.)

0811 3801 0819


Admin

0813-2310-201


PT. ANDALAN BANGUN SEJAHTERA

Jl. Sumur Batu No. 1, Kemayoran

Jakarta Pusat - Indonesia 10640

Telp : +6221-42803207, 4227517


Fax : +6221-42803208