AEMC AC Current Probe Model MN261

Alat Laboratorium Mikrobiologi

Deskripsi produk
AC Current Probe Model MN261
The MN261 is a high sensitivity probe with voltage outputs (100mV/A and 10mV/A) and combine two switch-selectable ranges of 20A and 200A, thus permitting accurate measurements at low and high levels. The MN261 is designed for oscilloscopes and other BNC terminated instruments. It has two performing ranges (20A, 200A) both voltage output (100mV/A and 10mV/A) and 40Hz to 10kHz response.

Specifications:
Maximum Conductor Size
0.78" (20mm), bus bar 20x5mm
Current Range
20A & 200Arms AC
Measurement Range
0.1 to 24A & 0.1 to 240A
Output
6ft (2m) lead with insulated BNC connector
Transformation Ratio
N/A
Output Signal
100mV/A (2V @ 20A), 10mV/A AC (2V @ 200A)
Accuracy 50/60Hz
2% ± 0.5A & 20A, 1.5% ± 0.5A @ 20A & 200A
Frequency Range
40Hz to 10KHz (-3dB)
Phase Shift At 50Hz
3° @ 200A
Open Secondary Voltage
N/A
Load Impedance
1MΩ & ≤ 100pF
Dimensions (H x W x D)
5.47 x 2.00 x 1.18” (139 x 51 x 30mm)
Weight With 24” (610mm) Sensor
6.3 oz (180g)
Operating Temperature
14° to +131°F (-10° to +55°C)
Overload
24A & 240A for 10 min ON, 30 min OFF
Storage Temperature
-40° to +158°F (-40° to +70°C)
Operating Humidity
90% RH
Pollution Degree
2
Ingress Protection (Ip)
IP40
EMC
EN 61326-1
Safety Compliance
EN/IEC 61010-1 600V CAT III,
EN/IEC 61010-032

Hubungi :

Juni Tarigan (Mr.)

0811 198 0702


Pera (Ms.)

0811 3801 0819


Admin

0813-2310-201


PT. ANDALAN BANGUN SEJAHTERA

Jl. Sumur Batu No. 1, Kemayoran

Jakarta Pusat - Indonesia 10640

Telp : +6221-42803207, 4227517


Fax : +6221-42803208