AEMC AC Current Probe Model MN307

Alat Laboratorium Mikrobiologi

Deskripsi produk
AC Current Probe Model MN307
The MN307 is designed for low AC current measurements up to 10A, such as secondary of CTs or even small motors and appliances. It offers a higher voltage output of 100mV per Amp (1VAC @ 10AAC) for enhanced sensitivity at lower levels, while offering a high crest factor at full range. The MN307 has an integral 5 ft (1.5m) lead terminated by shrouded banana plugs.

Specifications:
Maximum Conductor Size
0.78" (20mm), bus bar 20x5mm
Current Range
10Arms AC
Measurement Range
0.1 to 12A
Output
5 ft (1.5m) lead with 4mm safety banana plug
Transformation Ratio
N/A
Output Signal
100mV/AAC (1V @ 10A)
Accuracy 50/60Hz
1% @ 10A
Frequency Range
40Hz to 10KHz
Phase Shift At 50Hz
2.5° @ 10A
Open Secondary Voltage
N/A
Load Impedance
1MΩ
Overload
20A continuous
Dimensions (H x W x D)
5.47 x 2.00 x 1.18” (139 x 51 x 30mm)
Weight
6.3 oz (180g)
Operating Temperature
14° to +131°F (-10 to +55°C)
Storage Temperature
-40° to +158°F (-40° to +70°C)
Operating Humidity
90% RH
Ingress Protection (Ip)
IP40
Pollution Degree
2
EMC
EN 61326-1
Safety Compliance
EN/IEC 61010-1 600V CAT III,
EN/IEC 61010-032

Hubungi :

Juni Tarigan (Mr.)

0811 198 0702


Pera (Ms.)

0811 3801 0819


Admin

0813-2310-201


PT. ANDALAN BANGUN SEJAHTERA

Jl. Sumur Batu No. 1, Kemayoran

Jakarta Pusat - Indonesia 10640

Telp : +6221-42803207, 4227517


Fax : +6221-42803208