Automotive Tester PCE-CT 29-ICA Incl. Iso Calibration Certificate

Automotive Tester PCE-CT 29-ICA incl. iso calibration certificate
Instrument Laboratorium

Deskripsi produk
DESCRIPTION
Automotive Tester with a measuring range of 0 ... 2000 µm / Micro-USB /
statistics function / limit value alarm function / temperature and moisture measurement / V-groove
Software for transferring the measured values

The automotive tester has a measuring range of 0 ... 2000 µm. The Material tester can measure the coating thickness on ferrous (Fe) and non-ferrous (NFe) metals. For a better analysis of the measurements, the automotive tester has a measuring function based on the SSPC standards. With this function, the corrosion protection of a coating can be checked with the Material tester.

The Group function stores the measured values directly on the Material tester. A memory of 50 groups with 50 measurements each is available on the Material tester. In each group, statistics are created for all measured values from the Automotive Tester. All measurement data and statistics can be recalled after a measurement run on the Automotive Tester.

For further analysis of the measured values, the Material tester can be connected to a PC. The Automotive Tester has a micro-USB interface for this purpose. The software can be used to transfer the measurement data from the Material tester to a PC. In addition, it is possible to carry out live measurements with the Material tester using the software. For further processing of the measured values from the Automotive Tester, they can be exported in CSV and XLS format via the software.

In addition to the coating thickness measurement, the Automotive Tester can measure the temperature and humidity of the environment. Thus, the Automotive Tester can be used to find out whether the climatic conditions are right to carry out further processing on the coating.

With the V-groove, the coating thickness of, for example, pipes can also be determined with the Automotive Tester.

HIGHLIGHTS
- Measuring range 0 ... 2000 µm
- with SSPC measuring function
- Individually adjustable limit value alarms
- Data memory with up to 2500 measured values
- temperature and humidity measuring function
SPECIFICATION


Measurement on ferrous metal (Fe)
Measuring range
0 ... 2000 µm
Resolution
0.1 µm @ 0.0 ... 99.9 µm

1 µm @ 100 ... 2000 µm
Accuracy
±(2 % ±2 µm of Mw.)
Repeatability
±(1 % ±1 µm of Mw.)
Smallest radius of curvature
1.5 mm
Smallest measuring area
Ø7 mm
Smallest layer thickness
0.5 mm


Measurement on non-ferrous metal (NFe)
Measuring range
0 ... 2000 µm
Resolution
0.1 µm @ 0.0 ... 99.9 µm

1 µm @ 100 ... 2000 µm
Accuracy
±(2 % ±2 µm of Mw.)
Repeatability
±(1 % ±1 µm of Mw.)
Smallest radius of curvature
3 mm
Smallest measuring area
Ø5 mm
Smallest layer thickness
0.3 mm


Temperature

Measuring range
0 ... 50 °C / 32 ... 122 °F
Resolution
0.1 °C / °F
Accuracy
±1.2 °C / ±2.2°F


Humidity

Measuring range
0 ... 100 % r. h.
Resolution
0.1 % r. h.
Accuracy
±3.2 % r. h. @ 20.0 ... 70.0 % r. h.

±4.0 % r. h. @ 0.0 ... 19.9 % r. h.

±4.0 % r. h. @ 70.1 ... 100.0 % r. h.


Further specifications

Base material for measurements Ferrous (Fe) and non-ferrous (NFe) metals
Display
2.4 " LC display
Automatic display orientation
0, 90, 180 and 270 °, can be switched off

(only measuring window)
Statistic functions
average, highest, lowest and SDEV measured value
Measuring modes
direct, groups, SSPC
Units
µm, mm, mils, inch
Power supply
2 x 1.5 V AA batteries
Interface
Micro-USB (for data transfer only)
Alarm
signal tone and / or LED signal light in case of

Exceeding of the adjustable upper and lower alarm limit
Switch-off
Off, 30 seconds, 1 minute, 5 minutes
Menu languages
English, German, French, Spanish,

Italian, Portuguese, Chinese, Japanese
Operating conditions
0 ... 50 °C, 20 ... 90 % r.h., non-condensing
Storage conditions
-10 ... +60 °C, 20 ... 90 % r.h., non-condensing
Dimensions
35 x 64 x 137 mm
Weight
175 g



DELIVERY SCOPE
1 x Automotive Tester PCE-CT 29-ICA
1 x set of standard foils
1 x carrying case,
1 x calibration plates (Fe and NFe)
1 x mass data storage
2 x 1.5 V AA battery,
1 x instruction manual
1 x ISO Calibration Certificate