Automotive Tester PCE-CT 80-FN2D5-ICA Incl. ISO-Calibration Certificat

Automotive Tester PCE-CT 80-FN2D5-ICA incl. ISO-Calibration Certificat
Instrument Laboratorium

Deskripsi produk
DESCRIPTION
Automotive tester for Fe and NFe / USB interface / Battery operation /
Integrated data storage
The automotive tester is a measuring device for the non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the coating thickness gauge, measuring points that are difficult to access can also be easily reached. The menu navigation of the coating thickness gauge allows easy adjustment and setting to new parameters and makes this handy coating thickness gauge an indispensable measuring device for control measurements in production, workshop and quality assurance.

The automotive tester is also ideal for immediately determining and assessing accident damage to vehicles, for example, but the coating thickness gauge can also be used optimally in the industrial sector for incoming and outgoing inspection and material testing in production.

The ergonomically designed automotive tester with external sensor allows you to rapidly determine measurement results with high accuracy. The coating thickness gauge measures non-magnetic layers such as paint, plastic, chrome, copper, zinc, enamel, etc. on steel/iron, as well as non-conductive layers such as paint, plastic, enamel, paper, glass, rubber, etc. on copper, aluminum , brass and stainless steel, as well as anodized aluminum.

HIGHLIGHTS
- For measurements on iron/steel and non-ferrous metals
- Measurements cannot be influenced by vibrations
- Practical V-groove on the measuring heads
- Ergonomic design
- Warning message for measurements outside the maximum measuring range
- Wear-resistant, spring-mounted measuring head for precise measuring results
SPECIFICATION
Measuring range
Fe: 0 ... 2500 µm

NFe: 0 ... 2500 µm
Accuracy
±(2 % of reading + 1 µm)
Resolution
0.1 µm (<100 µm)

1 µm (>100 µm)
Measurable materials
For measurements on iron/steel and non-ferrous metals
Min. radius of curvature convex
5 mm / 0.19"
Min. radius of curvature concave
25 mm / 0.98"
Min. measuring surface
Ø17 mm / 0.67"
Min. substrate thickness
0.2 mm / 0.008" (on magnetic materials)

0.05 mm / 0.002" (on non-magnetic materials)
Probe mode
Autom. mode with material detection (Fe + NFe)

Magnetic mode (Fe)

Eddy current mode (NFe)


Calibration
Multipoint calibration (1 ... 4 points for each group)

Zero-point calibration
Units
µm, mm, mils
Data transfer
USB 2.0
Memory
A volatile measuring group (DIR mode)

Four measuring groups with autom. storage and max. 2000 readings (GEN mode)
Statistical functions
Number of measured values, mean, minimum, maximum, standard deviation
Alarm
Display when the adjustable upper and lower alarm limits are exceeded
Operating time
Autom. shutdown mode (3 min.)
Power supply
3 x 1.5 V AAA batteries
Display
128 x 128 px LCD display
Indicators
Battery status

Fault detection
Operating conditions
0 ... +50 °C / 32 ... 122 °F

20 ... 90 % RH non-condensing
Storage conditions
-10 ... +60 °C / 14 ... 140 °F

20 ... 90 % RH non-condensing
Dimensions
143 x 71 x 37 mm / 5.6 x 2.8 x 1.5" (L x W x H)
Weight
With sensor and batteries: ca. 271 g / 9.5 oz

DELIVERY SCOPE
1 x Automotive tester PCE-CT 80-FN2D5-ICA
3 x AAA batteries
1 x Instruction manual
1 x Carrying case
1 x Set of standard foils
1 x Calibration plates (Fe and NFe)
1 x ISO-Calibration Certificate