Car Measuring Device PCE-EVSE 310+

Car Measuring Device PCE-EVSE 310+
Instrument Laboratorium

Deskripsi produk
DESCRIPTION
Car Measuring Device / vehicle simulation / cable simulation / CP output and mains socket for measuring purposes / incl. transport bag
The Car Measuring Device is for VDE 0100 testers to test charging stations (charging mode 3) for electric cars. This adapter can be used with the PCE-ITE 55B installation tester or with most other standard VDE 0100 testers. Thanks to the LEDs for voltage detection on the 3 phases, it can be quickly determined if there is an installation error.


The PP State rotary switch can be used to simulate the current carrying capacity of the charging cable. The current carrying capacity is simulated with various resistors in the Car Measuring Device, which are connected between PP and PE conductors. Various vehicle states can be simulated using the CP State rotary switch. The vehicle states are simulated with different resistors connected between the CP and PE conductors.

An external load can be connected to the socket. This output is only intended for measuring purposes and offers the option of checking the function of the electricity meter. The Car Measuring Device can also be used to simulate a PE fault (earth fault). The Car Measuring Device is supplied in a device bag. There is also an optional adapter for wallboxes with a type 1 connection.
HIGHLIGHTS
- PE pre-test
- Status of the Proximity Pilot PP and the Control Pilot CP
- Simulation of CP fault "E" and PE fault
- Mains socket for measuring purposes
- Safety measuring sockets
- incl. adapter to type 1
- incl. type 2 plug
SPECIFICATION
. . . . . . . . . . . . . . . . . . . . .

Test Functions

PE pre-test
yes, with capacitive electrode
PP Simulation
open, 13 A, 20 A, 32 A, 63 A
CP Status
A, B, C, D
CP error "E"
E
PE fault / earth fault
Yes


General technical data

Connections
L1, L2, L3, N, PE
Connections Additional information
max. 230V (1-phase) / 430V (3-phase) ; 50 / 60Hz
10A / 250 V
Type 2 plug fixed to the cable
(optional adapter required for type 1)
Standard(s)
IEC62196-2 Type 2 connector
Cable length
25 cm
Safety standard
CAT II / 300V
Power socket
max. 250 V; 50/60 Hz; 10 A
Outputs
2 x 4mm sockets (signal output terminals)
Fuse(s)
Power socket T10A/250V
Protection class (device)
IP40
Weight
643 g
Dimensions (L x W x H)
600 x 105 x 73 mm
Operating conditions
0 ... 40 °C , 80 % r.H.
Storage conditions
-10 ... 50 °C , 80 % r.F
Languages of instructions
German, English

DELIVERY SCOPE
1 x Car Measuring Device PCE-EVSE 310+
1 x operating instructions
1 x transport bag

1 x type 2 plug
1 x adapter to type 1 (PCE-EVSE ADP)