Clamp Meter PCE-MCM 10-ICA Incl. ISO Calibration Certificate

Clamp Meter PCE-MCM 10-ICA incl. ISO Calibration Certificate
Instrument Laboratorium

Deskripsi produk
DESCRIPTION
Process clamp meter with 1 m (3.3 ft) cable / measurement range ±99.9 mA DC / manual zero point /

battery life of approx. 40 hours / automatic power off / clamp opening Ø 5 mm /
accuracy of ±0.3% of rdg.

The process clamp meter has a measurement range of ±99.9 mA DC. With an accuracy of 0.3% of rdg. +8 digits, the process clamp meter is a particularly accurate measuring instrument. In order to conveniently perform measurements with the process clamp meter, the current clamp itself is connected to a 1 meter / 3.3 ft cable. The current clamp can thus be attached to the cable to be measured. The process clamp meter can be conveniently placed aside at the workplace. This leaves both hands free while reading the measured values, for example to carry out adjustments or configurations on the process technology. Due to the high accuracy and the external sensor, the process clamp meter is ideally suited to make quick and reliable current measurements when process signals are involved.

In order to carry out a current measurement, the current clamp of the process clamp meter must be clamped around the cable to be checked. This allows the process clamp meter to measure the flowing current inductively. This has the particular advantage that a current measurement can be carried out during operation with the process clamp meter.

For improved visibility, the process clamp meter is equipped with an LED. With the LED of the process clamp meter, the measuring spot can be ideally illuminated.

If you have any further questions about the PCE-MCM 10 process clamp meter, please take a look at the following technical data or use our contact form. Our technicians and engineers will be happy to advise you on the process clamp meter or any other products in the fields of control, laboratory or measuring technology or scales and balances from PCE Instruments.

HIGHLIGHTS
- Detachable process clamp meter with 1 m / 3.3 ft cable
- Clamp opening of 5 mm diameter
- Measurement range ±99.9 mA DC
- Display with backlight
- Operating time of approx. 40 hours

SPECIFICATION


Measuring range
±20.99 mA DC
Resolution
0.01 mA
Accuracy
±(0.3 % of rdg. + 8 Digits)
Measuring range
±21.0 … ±99.9 mA DC
Resolution
0.1 mA DC
Accuracy
±(1 % of rdg. + 8 Digits)


Influence of the earth's magnetic field on the measured value, max. 0.25 mA DC


Diameter of clamp opening
Ø5 mm
Switch-off
automatic
Continuously switched on
after 10 minutes OFF
Operating voltage
3V via 2 AA batteries
Battery life
approx. 40 hours
Protection class
IP40
Overvoltage categories
CAT II 300V
Operating conditions
-10 … 50°C / 14 ... 122°F
Storage conditions
-15 … 60°C / 5 ... 140°F
Environmental humidity
<90% RH at < 30°C / 86°F

<75% RH at 30 ... 50°C / 86 ... 122°F
Working altitude
0 ... 2000 m / 6,561 ft above sea level
Dimensions
handheld device: 180 x 55 x 39 mm / 7.1 x 2.2 x 1.5 in

current clamp: 90 x 40 x 1.5 mm / 3.5 x 1.6 x 0.06 in

cable length: approx. 1 m / 3.3 ft
Weight
268 g / 0.6 lbs with batteries inserted

DELIVERY SCOPE
1 x Clamp Meter PCE-MCM 10-ICA
2 x 3V via 2 AA batteries
1 x Instruction manual
1 x ISO Calibration Certificate