Condition Monitoring Ultrasonic Material Thickness Meter PCE-TG 75A-IC

Condition Monitoring Ultrasonic Material Thickness Meter PCE-TG 75A-IC
Instrument Laboratorium

Deskripsi produk
DESCRIPTION
Material thickness gauge with data memory / adjustable sonic velocity / calibration reference mounted on the housing / material thickness measurement up to 225 mm / limit value alarm / optionally with ISO calibration certificate
The material thickness gauge can measure material thicknesses up to 225 mm. To ensure that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sonic velocity in the material thickness gauge. For materials such as steel, aluminium, zinc, silver and gold, the appropriate sonic velocities are already stored in the device library. This means that the material thickness gauge can be used universally.

Individual maximum and minimum values can be stored with the material thickness gauge's limit value function. If the measured value of the test specimen is outside the limits, the material thickness gauge signals this visually. If required, the material thickness gauge can also provide acoustic signalling in addition to the visual display. The material thickness gauge is therefore used, for example, in quality assurance and incoming goods inspection.

The material thickness gauge has a data memory on which the measured values can be recorded. After a measurement process, the stored measured values can be analysed directly on the material thickness gauge. The stored data is displayed graphically by the material thickness gauge. In addition, each individual measuring point can be approached and read in the graphic of the material thickness gauge. To simplify the analysis of the measured values, the average, the largest and smallest measured values are displayed on the material thickness gauge. The material thickness gauge can optionally be equipped with an ISO calibration certificate.

HIGHLIGHTS
- Measured value memory
- Calibration reference on housing
- Automatic switch-off
- Material thickness measurement up to 225 mm
- Battery status display
- Optional with ISO calibration certificate
SPECIFICATION
Material thickness

Measuring range
1 mm ... 99.99 mm
Resolution
0.01 mm
Accuracy
±0.5 % v. Mw. + 0.05 mm


Material thickness

Measuring range
100 mm ... 225 mm
Resolution
0.1 mm
Accuracy
±0.5 % v. Mw. + 0.05 mm


Sensor

Designation
PCE-TG 5M10d
Frequency
5 MHz
Temperature range
-10 ... 60 °C
Measurable materials
Steel, aluminium, zinc, silver, gold, metal, plastic, ceramic, glass, other homogeneous materials
Minimum diameter of pipes
30 mm
Additional description
Standard probe for flat materials
Dimensions
Ø10 mm x 23.4 mm
Weight
39.5 g


General technical data

Units
mm
Display type
TFT colour display
Display size
2.4 inch
Storage medium
Internal memory
Memory capacity
500 values
Automatic switch-off from...to
2 ... 30 min.
Automatic switch-off can be deactivated
Yes
Sonic speed adjustable
1000 ... 9999 m/s
Menu language
English (US), Chinese
Protection class (device)
IP52
Weight
230 g
Dimensions (L x W x H)
168 x 87 x 35 mm
Operating conditions
0 ... 40 °C , 0 ... 90 % r.H
Storage conditions
0 ... 40 °C , 0 ... 90 % r.H
Accumulator/battery
3x 1.5 V AA battery , alkaline-manganese
Capacity
3000 mAh

DELIVERY SCOPE
1 x PCE-TG 75A-ICA material thickness gauge
1 x PCE-TG 5M10d sensor
1 x coupling gel (TT-GEL)
1 x transport bag
3 x 1.5 V AA batteries
1 x quick start guide
1 x ISO calibration certificate