Durometer PCE-DDA 10-ICA Incl. ISO Calibration Certificate

Durometer PCE-DDA 10-ICA incl. ISO Calibration Certificate
Instrument Laboratorium

Deskripsi produk
DESCRIPTION
Digital Durometer to measure Shore A hardness in shoft gums, rubber and elastomers with USB-Port and downloadable software
The PCE-DDA 10 durometer is an ergonomic device to check Shore hardness in gum, plastic and other non-metallic materials. It has been designed with a very high quality. The PCE-DDA 10 durometer is mainly used for soft gums, elastomers, natural rubber, neoprenes, casting resin, white PVC, leather, etc. If the material thickness is not enough, it should be layered and tightened on the back with the same material in order to increase its thickness.

HIGHLIGHTS
- Handheld device
- Digital display
- Plastic case included
- For Shore A measurements
- Large display
- Single and Serial Measurements
- Data transfer to pc
- Incl. ISO Calibration Certificate


SPECIFICATION
Measurement range
0 ... 100 Shore A
Resolution
0.1
Accuracy
< ± 1
Indenter
35°± 0.25°
Memory
Saves up to 500 measurements
Dimensions
153 x 50 x 29 mm / 6 x 1.9 x 1.1 in (main body)
Weight
Approx. 300 g / < 1 lb
Power supply
3.6V rechargeable Ni-MH battery
Max. operating time
Up to 20 h continuous use at full charge
Charging time
Approx. 3 h
Standards
GB/T 531.1, ISO 7619-1, ASTM D 2240

DELIVERY SCOPE
1 x PCE-DDA 10 Durometer
1 x Power Supply
1 x Standard calibration plate
1 x Case
1 x Battery
1 x User's manual
1 x ISO Calibration Certificate