Force Gage PCE-C-R10LFC Series 5-100 Kg

Force Gage PCE-C-R10LFC series 5-100 kg
Instrument Laboratorium

Deskripsi produk
DESCRIPTION
Thanks to its small dimensions, the miniature Force Gage is easy to use on hard-to-reach measuring points. The height in particular is something special with this Force Gage. With a diameter of only 10 mm, this Force Gage is smaller in diameter than a 1 cent coin.



SPECIFICATION
Rated load / force F.S.
5 / 10 / 20 / 30 / 50 / 100 kg
50 / 100 / 200 / 300 / 500 / 1000 N
! Rated load / force selectable !
Limit load / force
120 %
Breaking load / force
150 %
Rated output
1.0 – 1.5 mV/V
Operating range of supply voltage
2.5 V – 5 V
Maximum supply voltage
5 V
Deviations of the zero signal
± 2 % F.S.
Linearity deviation
1.0 F.S.
Reverse voltage (hysteresis)
1.0 F.S.
Repeatability
1.0 F.S.
Stress creep (30 min)
0.1 F.S.
Input resistance
350 ± 10 Ω
Output resistance
350 ± 3 Ω
Insulation resistance
≥5000 MΩ / 100 VDC
Nominal range of ambient temperature
-10 … 60 °C / 14 ... 140 °F
Service temperature range
-20 … 80 °C / -4 ... 176 °F
Temperature coefficient of characteristic value
0.1 % F.S. / 10 °C / 50 °F
Temperature coefficient of zero point
0.1 % F.S. / 10 °C / 50 °F
Sensor cable
Ø 2 x 3 m / 6 ft 6" x 9ft 10" (ends open)
Cable assignment
EXC+ = red
EXC- = black
SIG+ = green
SIG- = white
GND = yellow
Material / measuring body
stainless steel
Protection
IP65
! N.B. Rated load / force selectable !