IoT Meter PCE-TG 300-NO5

IoT Meter PCE-TG 300-NO5
Instrument Laboratorium

Deskripsi produk
DESCRIPTION
IoT meter
Large measuring range / Up to 600 mm / Pulse-echo or echo-echo mode / For all homogeneous materials / Print function via Bluetooth / USB connection
The PCE-TG 300-NO5 is an IoT meter with special sensors for various applications. In general, the wall thicknesses of all homogeneous materials can be measured with the thickness meter. For damping or scattering materials such as plastic or cast a special sensor is available. An angled 90° sensor also enables measurements at hard-to-reach measuring points. The speed of sound can be set freely on the thickness meter and thus adapted to a wide variety of materials.

The measured values ​​are displayed directly on the easy-to-read TFT color display. Due to the internal memory, which can be read out via the optionally available software, different measuring points can be clearly stored. The non-destructive ultrasound measuring method enables the measurement even on end products. Thanks to the Echo-Echo working mode, even coated workpieces can be measured.
HIGHLIGHTS
- Large measuring range
- Various sensors available
- Battery operation
- Error and voids detection
- Internal measurement data memory
- Print via Bluetooth
SPECIFICATION
PCE-TG-NO5 sensor

Measuring range
1 ... 600 mm / 0.039 ... 23.62" (steel)
Minimum diameter of pipes
20 x 3 mm / 0.787 ... 0.118"
Frequency
5 MHz
Diameter
10mm / 0.39"
Description
normal measurement
PCE-TG 300-NO5 device

Measuring range
P-E: pulse-echo mode 0.65 ... 600 mm / 0.025 ... 23.62" (steel)

E-E: Echo-Echo mode 2.50 ... 100 mm / 0.098 ... 2.36"
Accuracy
±0.04 mm H[mm] (<10 mm); ±0.4 % H[mm] (>10 mm)

H refers to the material thickness of the workpiece
Resolution
0.1 mm / 0.01 mm / 0.001 mm (adjustable)
Measurable materials
metals

plastics

ceramics

epoxy resin

glass

and all homogeneous materials
Working modes
Pulse-echo mode (fault and void detection)

Echo-echo mode (hide layer thicknesses, e.g. paint)
Calibration
sound velocity calibration

zero calibration

two-point calibration
View Mode
Normal Mode, Scan Mode, Difference Mode
Units
mm / inch
Data transfer
printing via Bluetooth / USB 2.0
Memory
non-volatile memory with 100 data groups with 100 data sets each
Operating time
continuous operation 100 h

automatic stand-by mode (adjustable)

auto power off mode (adjustable)
Power supply
4 x AA battery 1.5 V
Display
320 x 240 pixels TFT LCD color display with brightness adjustment
Operating conditions
0 ... +50 °C / 32 ... 122 °F, ≤80 % RH non-condensing
Storage conditions
-20 ... +70 °C / -4 ... 158 °F, ≤80 % RH non-condensing
Dimensions
185 x 97 x 40 mm / 7.2 x 3.8 x 1.5"
Weight
375 g / 13.2 oz
DELIVERY SCOPE
1 x IoT meter PCE-TG 300-NO5
1 x Sensor PCE-TG-NO5
1 x 100 ml coupling gel
1 x Transport case
4 x AA batteries
1 x User manual