KYORITSU Power Quality Analyzer KEW 6315

Alat Laboratorium Mikrobiologi

Deskripsi produk
• Simultaneous Power & Power quality measurements
• Helpful support functions
• Measurement with high accuracy
• Remote monitoring on PC and Android device
• Various Clamp Current Sensors
• Energy consumption check on site
• IEC 61010-1 CAT IV 300V, CAT III 600V, CAT II 1000V






Simultaneous Power & Power quality measurementsPower/ Harmonics/ Waveform/ Power quality are recorded at all CHs. (Voltage: 3ch, Current 4ch)
Helpful support functionsQuick Start Guide, Wiring check and Sensor detection for easy and reliable measurement
Measurement with high accuracyGuaranteed accuracy:±0.3%rdg (energy),±0.2%rdg (voltage/ current)
Complies with the International Standard IEC 61000-4-30 Class S and the European Standard EN50160
Remote monitoring on PC and Android deviceRemote checking of measurement in real-time is possible via Bluetooth communication.
Recorded data can be saved in the supplied SD card.
EN50160 report can be generated after survey by PC software.
Various Clamp Current SensorsVarious types of clamp and flexible sensors are available:
from 1000mA Range up to 3000A Range and Earth leakage measurements
Energy consumption check on site
Trend and demand graphs for easy recognition.
TFT color display with high resolution.
IEC 61010-1 CAT IV 300V, CAT III 600V, CAT II 1000V
Power Quality Analyzer
Wiring connections
1P2W, 1P3W, 3P3W, 3P4W
Measurements and parameters
Voltage, Current, Frequency, Active power, Reactive power, Apparent power,Active energy, Reactive energy, Apparent energy, Power factor (cos θ),
Neutral current, Demand, Harmonics, Quality (Swell/Dip/Interruption, Transients/Over voltage, Inrush current, Unbalance rate),
Capacitance calculation for PF correction unit, Flicker
Voltage (RMS)


Range
600.0 / 1000V
Accuracy
600.0V Range : (sine wave 40 - 70Hz)
10% - 150% against 100V or more of nominal V : Nominal V±0.5%
Out of above range : ±0.2%rdg±0.2%f.s.
1000V Range : ±0.2%rdg±0.2%f.s.(sine wave 40 - 70Hz)
Allowable input
1 - 120% of each range (rms). 200% of each range (peak)
Display range
0.15 - 130% of each range
Crest factor
3 or less
Sampling speed of Voltage transient
24µs
Current (RMS)


Range
8128/8135 ( 50A type ) : 5000mA / 50.00A / AUTO
8127 ( 100A type ) : 10.00 / 100.0A / AUTO
8126 ( 200A type ) : 20.00 / 200.0A / AUTO
8125 ( 500A type ) : 50.00 / 500.0A / AUTO
8124/8130 ( 1000A type ) : 100.0 / 1000A / AUTO
8146/8147/8148 ( 10A type ) : 1000mA / 10.00A / AUTO
8133 ( 3000A type ) : 300.0 / 3000A / auto
Accuracy
±0.2%rdg±0.2%f.s. + accuracy of clamp sensor (sine wave, 40 - 70Hz)
Allowable input
1 - 110% of each range (rms). 200% of each range (peak)
Display range
0.15 - 130% of each range
Crest factor
3 or less
Active power


Accuracy
±0.3%rdg±0.2%f.s. + accuracy of clamp sensor
(power factor 1, sine wave, 40 - 70Hz)
Influence of power factor
±1.0%rdg (reading at power factor 0.5 against power factor 1)
Frequency meter range
40 - 70Hz
Power supply (AC Line)
AC100 - 240V / 50 - 60Hz / 7VA max
Power supply (DC battery)
Alcaline size AA battery LR6 or Ni-MH (HR-15-51) × 6
Battery life approx. 3h (LR6, Backlight OFF)
Internal memory
FLASH memory (4MB)
PC card interface
SD card (2GB)
PC communication interface
USB Ver2.0, Bluetooth Ver2.1 + EDR Class2
Display
320 × 240 (RGB) Pixel, 3.5inch color TFT display
Display update period
1 sec
General
Applicable standards
IEC 61010-1 CAT IV 300V, CAT III 600V, CAT II 1000V Pollution degree 2
IEC 61010-2-030, IEC 61010-031, IEC 61326, EN 50160
IEC 61000-4-30 Class S, IEC 61000-4-15, IEC 61000-4-7
Temperature and humidity range
23±5ºC, less than 85% RH (without condensation)
Operating temperature & humidity range
0 - +45ºC, less than 85% RH (without condensation)
Storage temperature & humidity range
-20 - +60ºC, less than 85% RH (without condensation)
Power supply (AC Line)
AC100 - 240V / 50 - 60Hz / 7VA max
Power supply (DC battery)
Alcaline size AA battery LR6 or Ni-MH (HR-15-51) × 6
Battery life approx. 3h (LR6, Backlight OFF)
Dimensions
175(L) × 120(W) × 68(D) mm
Weight
Approx. 900g
Included Accessories
7141B (Voltage test lead)
7170 (Power cord)
7219 (USB cable)
8326-02 (SD card 2GB)
9125 (Carrying case for KEW 6315, KEW 6315-01)
9135 (Carrying case for KEW 6315-03, KEW 6315-04, KEW 6315-05)
Input terminal plate × 6, KEW Windows for KEW 6315 (PC software),
Quick manual, Alkaline size AA battery (LR6) × 6
Optional Accessories
8124/8125/8126/8127/8128 (Load current clamp sensor)
8130/8133(*)/8135(*) (Flexible clamp sensor)
8146/8147/8148 (Leakage and Load current clamp sensor)
8312 (Power supply adaptor)
9132 (Magnet carrying case)
* The KEW 6315 can be used with firmware versions V1.50 or later for the KEW 8133 and V3.00 or later for the KEW 8135.
Please check here for the latest firmware.

Set Model *Included accessories for below models are same with above-mentioned.
KEW 6315-018125 (500A: φ40mm) × 3
Carrying case: 9125
KEW 6315-038130 (1000A : φ110mm) × 3
Carrying case: 9135
KEW 6315-048130 (1000A : φ110mm) × 4
Carrying case: 9135
KEW 6315-058133 (3000A : φ170mm) × 3
Carrying case: 9135

Hubungi :

Juni Tarigan (Mr.)

0811 198 0702


Pera (Ms.)

0811 3801 0819


Admin

0813-2310-201


PT. ANDALAN BANGUN SEJAHTERA

Jl. Sumur Batu No. 1, Kemayoran

Jakarta Pusat - Indonesia 10640

Telp : +6221-42803207, 4227517


Fax : +6221-42803208