Motorized Force Test Stand PCE-MTS500-DFG N 5K FD 300 KIT Incl. Force

Motorized Force Test Stand PCE-MTS500-DFG N 5K FD 300 KIT incl. Force
Instrument Laboratorium

Deskripsi produk
DESCRIPTION
Motorized test stand up to 5000 N, All force measuring devices of the PCE series with internal and external force measuring cell adaptable, Large stroke, Adjustable feed speed
The maximum force range of the motorized test stand is 500 kg. The use of the motorized test bench requires a power connection. The feed speed is variably adjustable between 30 mm/min and 230 mm/min. The precise measurement procedure is thus guaranteed with the motorized test stand. The force test stand is compatible with the following device series: PCE-FB series, PCE-FM series, PCE-LFG series and the PCE-PTR 200.
Wherever the human body reaches its limits in terms of force measurement, the motorized test stand comes into play. The user of the motorized test stand is obliged to prepare a risk analysis. If it emerges from this that the type of application and the samples pose a risk to the user, a safety device may be required, especially in the case of the test stand operated by an electric motor.

*** N.B. The mounting plate ADP-UNI accessory must be ordered for internal load cell force gauges ***


Force Gauge PCE-DFG NF 5K
With external load cell, USB interface and PC software

The force gauge with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell is connected to the force gauge by a sensor cable of approx. 3 m length and thanks to the small cell dimensions it ensures a versatile application. The force gauge load cell has several threaded holes on the underside, which allow a fixed installation.

The force gauge can operate at a sampling rate of up to 1600 Hz. The sampled measured values are displayed as an instantaneous value, as well as in a graph trace directly in the force gauge.

The measurements can be stored in the internal memory or transmitted via USB interface with the included software with a maximum of 800 Hz as a live measurement.

The PEAK Hold function allows freezing of the highest measured value in the force gauge until this value is exceeded or cleared.

The force gauge offers the option of storing two limit values, which are continuously compared with the instantaneous value. When exceeding or falling below these limits, a signal is displayed in the display of the force gauge, as well as a response via external interfaces, e.g. this can be used for the control of a testing machine.
PCE-DFG FD 300 force-displacement adapter / Incl. software / 11 components
The PCE-DFG FD 300 is a useful extension to the material test stand PCE-MTS 500 in connection with a force measuring device (e.g. PCE-DFG N 5K). This extension allows force-displacement diagrams and curves to be created. The software included in the scope of delivery offers the user an optimized interface for evaluating diagrams and graphs. In this way, material tests can be carried out with forces of up to 5000 N (500 kg / 1102 lb).
HIGHLIGHTS
- Adjustable feed speed
- Robust steel design
- Adjustable travel
- Large force measuring range
- Mains connection
- All PCE devices adaptable
- Manual or automatic procedure
- USB interface
- Graphic display
- Fast response time
- PC software
- Memory for 100 measurements
- Measuring cells easily exchangeable
SPECIFICATION
Motorized force test stand PCE-MTS500
Force range
max. 5000 N (500 kg / 1100 lbs)
Travel distance
max. 300 mm / 11.8"
Feed rate
30 ... 230 mm/min / 1.18 ... 9.05 in/min
Test table
Ø 160 mm/ 6.3"
Sample width
max. 200 mm / 7.9"
Guide columns
Ø 32 mm / 1.3"
Dimensions
1020 x 400 x 250 mm / 40.2 x 15.7 x 9.8"
Weight
ca. 60 kg / 132 lbs


Force gauge PCE-DFG N 5K
Measuring range
0 ... 5,000 N / 1,124 lbs
Resolution
1 N / 0.22 lbs
Accuracy
± 0.1% of the measuring range
Measurement units
N, kg, lb, KPa
Display
2.8" TFT graphic display
Alarm Modes
Inside, Outside, Crack, Shutdown
Sampling rate
6 ... 1600 Hz
Storage
100 measurements
Power supply
NiMH battery, 6V / 1600-mAh
Battery life
About 10 hours
Power adapter / charging adapter
12V / 1A
Outputs
Interface: USB
Switching output: 12V / 50-mA
Protection class
IP 54
Operating and storage conditions
-10 ... 50°C / 14 ... 122°F
5 ... 95% rh non-condensing
Mounting thread measuring cell
Up to 1,000 N / 225 lbs
2,500 ... 10,000 N / 562 ... 2,248 lbs
M10
M12


Dimensions
200 x 97 x 42 mm / 7.9 x 3.8 x 1.7 in
Weight
540 g / 1.2 lbs


Length measuring device PCE-DFG FD 300
Measuring range
-150 … 150 mm / -5.9 … 5.9"
Resolution
0.01 mm / 0.0004"
Accuracy
±0.03 mm / 0.001"
Operating conditions
Temperature: 0 … +50 °C / 32 … 122 °F
Storage conditions
Temperature: -20 … +65 °C / -4 … 149 °F

Humidity: 10 … 95 % RH, non-condensing
Weight
360 g / 12.7 oz
Power supply
3VCR 2032
Dimensions
394 x 40 x 10 mm / 15.5 x 1.5 x 0.4" (HxWxD)
DELIVERY SCOPE
1 x Motorized Test Stand PCE-MTS500-DFG N 5K FD 300 KIT
1 x Force gauge
1 x Length measuring device
1 x Bracket (consisting of 11 components)
1 x Mounting kit (consisting of 24 screws and 2 grub screws)
1 x Measuring system
1 x Data cable
1 x USB stick with PCE-DFG FD software (length measuring device)
1 x Load cell
2 x Eye bolt
1 x USB cable
1 x PC software (force gauge)
2 x Instruction manual