RETSCH DRUM MILL TM 500

RETSCH DRUM MILL TM 500
Saringan Mesh

Deskripsi produk
The Drum Mill TM 500 is a laboratory ball mill designed to grind large sample volumes up to 35 l. It accepts initial feed sizes of up to 20 mm and can achieve grind sizes down to 15 µm by friction and impact.

Hard, brittle or fibrous samples are pulverized in the 150 l drum filled with 80 kg grinding balls. The variable speed of 10 to 50 rpm, different grinding ball sizes and the possibility of long-term grindings of up to 100 h ensure perfect adaption to sample properties as well as reproducible results.

A Drum Mill TM 500 foodGrade model featuring a stainless steel 316L drum and hopper is available for applications where the sample must not be contaminated in any way.


EASY OPERATION
Thanks to the feed hopper and optional separating screen for grinding balls/ sample, operation of the drum mill TM 500 and handling of the required 80 kg of grinding balls are particularly ergonomic and simple. >

The drum is easily emptied by an electronic tilt function. Parameters like grinding time, start delay, or interval mode are selected and stored conveniently via the operating display. Thanks to programmable grinding breaks it is also possible to process heat-sensitive sample materials.

Intervals with forward and reverse mode combination are useful to avoid caking effects. For additional safety, the drum mill is equipped with an emergency switch for instant turn-off.
DRUM MILL TM 500GRINDING OF GRAVEL

40 kg (27 l) sample were filled in the drum of the Drum Mill TM 500, and 80 kg (17.6 l) of 20 mm grinding balls were added. The drum mill was operated for several hours at 50 rpm.

The fineness was measured after 2, 4, 6 and 8 h.
2h: D90 = 98 µm
4h: D90 = 37 µm
6h: D90 = 21 µm
8h: D90 = 15 µm
Sample: Gravel 10-15 mm
Feed quantity: 27 l
Grinding balls: 80 kg, 20 mm diameter
DRUM MILL TM 500TYPICAL SAMPLE MATERIALS

RETSCH drum mills are true allrounders. They homogenize, for example: activated carbon, alloys, bentonite, bones, carbon fibers, catalysts, cellulose, cement clinker, ceramics, chemical products, clay minerals, coal, coke, compost, concrete, electronic scrap, fibers, gypsum, glass, hair, hydroxyl apatite, kaolin, lime stone, metal oxides, minerals, ores, paint and varnish, paper, pharmaceutical products, pigments, plants, polymers, quartz, seeds, semi-precious stones, sewage sludge, slag, soil, tissue, tobacco, waste, wood, etc.
GRINDING GENTIAN ROOTS
22 l sample were filled in the drum of the Drum Mill TM 500, 80 kg of 30 mm grinding balls were added. The drum mill was operated for several hours at 50 rpm. The fineness was measured after 1 h.

1h: D90 = 130 µm

The optional separation unit to separate the ground sample from the balls was used.
Used separationd grids: 22 mm for 30 mm grinding ball separation in the upper, middle and lower position.

DRUM MILL TM 500TECHNICAL DATA
Applications
pulverizing, mixing, dry grinding
Field of application
agriculture, biology, chemistry, construction materials, engineering / electronics, environment / recycling, geology / metallurgy, glass / ceramics, medicine / pharmaceuticals
Feed material
soft, hard, brittle, fibrous
Size reduction principle
friction, impact
Material feed size*
< 20 mm
Final fineness*
< 15 µm
Batch size / feed quantity*
min. 1 l / max. 35 l
Rotation speed
10 - 50 min-1
No. of grinding stations
1
Material of grinding tools
hardened steel, stainless steel, steel 316L
Grinding drum sizes
150 l
Setting of grinding time
digital, 00:00:01 to 99:59:59
Drive
3-phase asynchronous motor with frequency converter
Drive power
2.2 kW
Electrical supply data
200-240 V, 50/60 Hz
Power connection
1-phase
Protection code
IP 30
Power consumption
~ 2200 W (VA)
W x H x D closed
1100 x 1604 x 936 mm
Net weight
~ 460 kg
Standards
CE
*depending on feed material and instrument configuration/settings