RETSCH HAMMER MILL HM 200

RETSCH HAMMER MILL HM 200
Saringan Mesh

Deskripsi produk
Hammer mills are used for crushing, pulverizing and deagglomeration of medium-hard, hard, brittle, tough and fibrous samples.

The rugged RETSCH Hammer Mill HM 200 accepts large feed sizes up to 100 mm which can be reduced to less than 0.8 mm, depending on the sample properties.

The mill is ideally suited for processing large volumes batchwise or continuously which ensures high sample throughput. Thanks to features like rugged design, easy handling and quick cleaning, the HM 200 is equally suitable for use in laboratories or pilot plants.
HAMMER MILL HM 200HIGH THROUGHPUT & DEFINED FINAL FINENESS
This diagram shows a comparison of the Hammer Mill HM 200 with two rotor mills. The extremely high sample throughput of the HM 200 is clearly visible. The HM 200 shows a good crushing efficiency of 125, which is the value of the maximum feed size divided by the finest achievable grind size. The SR 300 and SK 300 accept a maximum feed size of 25 mm (unlike the HM 200 which accepts sizes up to 100 mm) and crush particles to a size below 0.05 mm or 0.1 mm respectively - resulting in a higher crushing ratio.
Excellent crushing performance
Very high throughput of up to 1500 kg/h
Fixed speed of 3000 min-1
Sieve range from 2 - 40 mm
Feed size up to 100 mm, grind size < 0.8 mm
Easy access to crushing chamber facilitates cleaning
For batchwise or continuous grinding
Connector for dust extraction
HAMMER MILL HM 200TECHNICAL DATA
Applications
coarse and pre-crushing, desagglomeration
Field of application
agriculture, chemistry / plastics, coal, construction materials, engineering / electronics, environment / recycling, food / feed, geology / metallurgy, glass / ceramics
Feed material
medium-hard, hard, brittle, tough, fibrous
Size reduction principle
impact, shearing
Material feed size*
< 100 mm
Final fineness*
< 0.8 mm
Batch size / feed quantity*
up to 30 l depending on collecting receptacle
Speed at 50 Hz (60 Hz)
3000 min-1 (3500 min-1)
Throughput*
1500 kg/h
Rotor peripheral speed
31.4 m/s
Rotor diameter
200 mm
Types of rotors
10 swing hammer
Dry grinding
yes
Wet grinding
no
Cryogenic grinding
no
Material of grinding tools
hardened steel 1.0503 (hammers); steel 1.0330 (sieves)
Sieve sizes
2 / 3 / 4 / 5 / 6 / 8 / 10 / 15 / 40 mm
Dust extraction unit
yes
Process line version
yes
Collector capacity
10 l, 30 l, continuous outlet
Drive
3-phase motor
Drive power
1.5 kW
Electrical supply data
different voltages
Power connection
3-phase
Protection code
IP 54
W x H x D closed
320 x 960 x 800 mm
Net weight
~ 150 kg
Standards
CE
*depending on feed material and instrument configuration/settings