Schaller Humimeter FLH Hop Meter

Alat Laboratorium Mikrobiologi

Deskripsi produk
humimeter FLH Hop Meter
humimeter FLH Hop Meter
Professional hop moisture meter with data logger
Quick, easy measurement of loose and compressed hops
Various sensors selectable
Fix mounted insertion probe of 0,3 meter length
Long-term stable humidity and temperature sensors
Lifetime Support
Features
Ensure the quality of your hop harvest by determining the optimal water content of the hops, because only even hops that are not over-dried bring the highest yield. With the humimeter FLH from the Schaller company, hop moisture is measured in a matter of seconds. In addition, this hop moisture meter also determines the temperature of the hops.

Areas of Application:
For determination of water content of loose or compressed hops, hops equilibrium moisture content, air humidity of kiln and conditioning chamber, long-term recording of temperature and climate data.

Different sensors can be connected to the basic device, which can also be retrofitted at any time.
Benefits
Different sensors can be selected separately
Long-term stable humidity and temperature sensors
Easy data storage on the portable moisture meter
A high-performance series of hand-held measuring devices for moisture measurement with innovative sensor technology
Menu language in English, German, French, Italian, Spanish, Russian and many more on request
Technical data
Measuring range
4 to 40% water content (depending on the characteristic)
Resolution
0,1% water content
Calibration accuracy to reference material
+/- 0,5%
Temperature measuring range
-15 to +85 °C (only measuring tip)
Measurement result
Within seconds
Memory function
Hold function, datalog for 10.000 logs ​​with measuring point report
Power Supply
4 x 1,5 volt AA alkaline batteries
Power consumption
60 mA (with display lighting)
Dimensions
145 x 65 x 27 mm
Weight
250 g
Menu languages
English, German, Italian, French, Spanish, Portuguese, Czech, Polish, Russian, International

Further information
Folder humimeter FLH
Instruction manual humimeter FLH
Handling and measurement process
Switch on your measuring device and connect one of the sensors to the evaluation device - the available characteristic curves for the respective sensor are immediately shown on the display.
You can choose from the following sensors: cone sensor for measuring loose cones, lance for measuring in the pressed bale, infrared sensor for non-contact temperature measurement of the hops, air humidity and temperature sensor for measuring the hop equilibrium moisture content in the conditioning and for measuring the relative humidity, e.g. of the exhaust air during the drying process.

Hop cone sensor:
Fill the measuring chamber with loose cones and compress the cones using the compression device. Water content and temperature are immediately shown on the display.

Insertion probe:
After plugging the probe into the bale, water content and temperature can immediately be read off the display (the wrapping can be penetrated by the probe). If desired the measuring results can be saved via datalog.

Infrared sensor: Point the non-contact infrared sensor towards the material - the display immediately shows the current temperature.

humidity sensor: The following characteristic curves are available for selection: relative humidity, UGL hops (equilibrium humidity) and absolute humidity. The current temperature and humidity or water content can be read from the display and saved manually or automatically at adjustable intervals.

Hubungi :

Juni Tarigan (Mr.)

0811 198 0702


Pera (Ms.)

0811 3801 0819


Admin

0813-2310-201


PT. ANDALAN BANGUN SEJAHTERA

Jl. Sumur Batu No. 1, Kemayoran

Jakarta Pusat - Indonesia 10640

Telp : +6221-42803207, 4227517


Fax : +6221-42803208