Schaller Humimeter FLS Humidity And Temperature Heustock Probe

Alat Laboratorium Mikrobiologi

Deskripsi produk
humimeter FLS Humidity and temperature heustock probe
Robust probe with a length of two meters, divisible
Robust 2 meter lance
Long-term stable sensors
Measurement within seconds
Automatic averaging
Lifetime Support
Features
If the water content of stored hay, e.g. in a haystack, is too high, fungal and bacterial growth may occur. In these processes, energy is released in the form of heat, which leads to an increase of temperature within the haystack. In the worst case, the temperature inside the hay can rise so much that the hay ignites itself.

The operator of the haystack is obliged to regularly monitor the stored hay (fire police regulations). Failure to comply with this monitoring obligation can be punished as negligent arson in an emergency. Failure to do so can also lead to loss of insurance coverage!

The water content of the hay can be measured before it is put into the haystack, for example on the loading wagon or during drying with the hay probe. In general, a water content of less than 14% is considered harmless. In this way, a decision can be made before storage as to whether the hay still needs to be dried or whether the water content is low enough for safe storage.

The humimeter FLS With its two-meter-long lance, it enables easy control of the moisture content and temperature, even in the deep layers of the haystack.

By a regular and good monitoring, emerging heat spots or moisture spots can be detected and treated at an early stage.
Benefits
Very easy operation of the hay probe
Humidity and temperature measurement
Automatic temperature compensation
Reduces your drying costs
Prevent quality losses
Technical data
Measuring range
8 to 30% water content
Resolution
0,1 %
Calibration accuracy to reference material
+/- 0,8%
Temperature measuring range
-20 to +120 °C (only measuring tip)
Power Supply
4 x 1,5 volt AA alkaline batteries
Power consumption
60 mA (with display lighting)
Dimensions
2280 x 75 x 45 mm (without handle bar)
Weight
1200 g (with batteries)
Menu languages
English, German, Italian, French, Spanish, Portuguese, Czech, Polish, Russian, International

Further information
Instruction manual humimeter FLS
Handling and measurement process
Turn on the hay probe humimeter FLS . To do this, press the ON button for 3 seconds.

After a few moments, the hay probe is ready for use. The device is already calibrated - the water content is shown on the illuminated display - no conversion or looking up in tables is necessary.

Stick the lance into the haystack to determine the temperature and water content. You can take targeted measurements at different depths. The measurement happens in the area around the tip. Due to the 2 meter long lance, it is possible to detect moisture pockets or regions with increased temperatures even in deep layers.

You can measure in different positions of the haystack within a short time, or you can leave the sensor in a certain position in order to continuously monitor the drying process and the temperature variation of a critical area.

Comply with the obligation to regularly check the haystack easily and reliably. The measured values can easily be documented at the device. Each measuring value can be stored at the humimeter FLS with the push of a button.

With the optionally available USB interface, it is possible to transfer the stored values ​​to a PC or to print them out on a portable printer.

Hubungi :

Juni Tarigan (Mr.)

0811 198 0702


Pera (Ms.)

0811 3801 0819


Admin

0813-2310-201


PT. ANDALAN BANGUN SEJAHTERA

Jl. Sumur Batu No. 1, Kemayoran

Jakarta Pusat - Indonesia 10640

Telp : +6221-42803207, 4227517


Fax : +6221-42803208