Schaller Humimeter FS1

Alat Laboratorium Mikrobiologi

Deskripsi produk
humimeter FS1

Agricultural moisture analyser for grain
Measuring range: 5 - 30% water content
Calibration Accuracy: +/- 0,7%
60g sample amount
Ideal for determining the time of harvest
High measuring accuracy
Long-term stable
Measurement within seconds
Non-destructive measurement
Lifetime Support
Features
The humimeter FS1 Whole grain grain moisture meter is perfect for field control in agriculture and is often used to measure barley moisture. The meter is easy to use and only requires a small amount of sample. Cost-intensive errors due to incorrect humidity are thus avoided.
Our humimeter FS1 Moisture meter for grain has a measuring range of 5% to 30% water content (depending on the variety).

Areas of Application:
The grain moisture meter is used for corn, rye, triticale, wheat, barley, oats, rapeseed, soybeans, horse beans, sunflower seeds, sorghum, millet, mustard seed, buckwheat, rice husked and unhusked, green coffee husked and roasted coffee. The device is particularly suitable for field use.

The measuring device is adjusted according to Kascalestion to the reference method

EN ISO 6540 for corn
EN ISO 665 for oilseeds
EN ISO 712 for grain
EN ISO 24557 for legumes and beans
Benefits
Whole-grain knife with a small sample quantity of 60 g
For many cereals
No sample preparation necessary
Reduces drying costs
Prevent mold growth
Technical data
Measuring range
5 to 30% water content (depending on product type)
Resolution
0,1% water content
Calibration accuracy to reference material
+/- 0,7%
Compensation
Sample temperature measurement
Temperature compensation
Automatically
Measurement result
Within seconds without sample preparation
Memory function
Hold function
Dimensions
155 x 75 x 90 mm
Weight
360 g (with batteries)
Power Supply
4 x 1,5 Volt AA Alkaline batteries
offset function
Adjustment of the calibration curve
Menu languages
English, German, Italian, French, Spanish, Portuguese, Czech, Polish, Hungarian, Russian, International

Further information
Folder humimeter FS1
Instruction manual humimeter FS1


Florian Postl
Head of Sales and Product Management
Do you have any questions about our products? I would be happy to advise you personally!
Your advice
Handling and measurement process
In order to be able to guarantee precise measured values ​​in the long term, the humimeter Grain moisture meter automatically performs a self-calibration after switching on.
The relevant characteristic curve for the type of grain to be measured can then be selected on the device.
The measuring chamber of the grain measuring device is then filled with the required amount of the grain type. In order to determine the exact amount of grain, a scale and a measuring cup are included in the scope of delivery.

Thanks to a "hold function", the measured values ​​can be frozen on the display until the next button is pressed.
In order to increase the measurement accuracy and reproducibility, different hectoliter weight levels are stored in the device. This means that different bulk densities do not have a negative impact on the measurements. The entire grain moisture meter series has been calibrated and checked using the calibratable drying method EN-ISO 712.
At the same time, the sample temperature is measured, displayed and included in the moisture calculation.
The temperature range is from 0°C to 40°C and can be displayed in either °C or °F.

The water content can immediately be read off the large, well-lit display of the grain moisture tester.

– No time-consuming preparation of the sample is necessary
– Non-destructive measuring method
– Also barley moisture meter

Hubungi :

Juni Tarigan (Mr.)

0811 198 0702


Pera (Ms.)

0811 3801 0819


Admin

0813-2310-201


PT. ANDALAN BANGUN SEJAHTERA

Jl. Sumur Batu No. 1, Kemayoran

Jakarta Pusat - Indonesia 10640

Telp : +6221-42803207, 4227517


Fax : +6221-42803208